EAGLE users can upload files to this directory to share them with other EAGLE users. CadSoft Computer is in no way responsible for any problems users might encounter with files downloaded from this directory. In case of a problem with the contents of one of these files please contact the person who has uploaded the file directly via email.
ChipDesign has developed a general-purpose RF/microwave library for CadSoft Eagle, which it offers free-of-charge. PCB designers are nowadays confronted with transmission line effects, as the bandwidth of high-speed serial interfaces (DDR RAM, ethernet, PCI Express, SATA, USB), as well as the carrier frequency of wireless standards (2.45/5 GHz "dual-band" WiFi"), continuously increases. The use of the RF components of said library reduces risk and time-to-market.
Download the latest version from: http://chipdesign.be/software.html
AST3TQ oscillators from Abracon. These are high precision oscillators (0.28ppm), having available frequencies of 10.00MHz, 12.80MHz, 19.20MHz, 20.00MHz, 25.00MHz, 26.00MHz, 30.72MHz, 38.40MHz and 40.00MHz. All oscillators from this series output a CMOS level square wave.
This library contains every current Molex SL-Series PCB header available per the drawings on the Molex website.
Included SL series: 70541, 70543, 70545, 70551, 70553, 70555, 70634, 74095, 74099 and 87898.
Here is the library for Atmel device series SAMA5D3 which are a high-performance, power-efficient embedded MPU based on the ARM Cortex-A5 processor, achieving 536 MHz with power consumption levels below 0.5 mW in low-power mode. The device features a floating point unit for high-precision computing and accelerated data processing, and a high data bandwidth architecture. It integrates advanced user interface and connectivity peripherals and security features. This library contains was created for package 324-ball LFBGA (15 x 15 x 1.4 mm, pitch 0.8 mm).
This is my custom Arduino connector library. It contains all five of the basic headers on the Adruino Uno R3: Digital High, Digital Low, Power, Analog and ICSP. The connectors are basic enough but include the added benefit that all their pin functions are labeled for easier schematic design.
Look for my Arduino Uno R3 Sheild PCB which includes these connectors and a ready-to-go pin-labeled PCB layout!
Here is the library for new Microchip family PIC32MX1XX/2XX/5XX 64/100-PIN which are 32-bit Microcontrollers (up to 512 KB Flash and 64 KB SRAM) with Audio/Graphics/Touch (HMI), CAN, USB, and Advanced Analog. They are available in 64pins and 100pins packages.
Here is the library for new Texas Instruments device bq500215 which is a dedicated wireless power digital controller that integrates the logic functions required to control wireless power transfer to a single WPC-compliant receiver. Main application is wireless chargers. It is available in 64 pins VQFN-9x9mm package.
Here is the library for new NXP device N516x which is a range of ultra low power, high performance wireless microcontrollers supporting JenNet-IP, ZigBee PRO or RF4CE networking stacks to facilitate the development of Home Automation, Smart Energy, Light Link and Remote control applications. It is available in VQFN40-6x6mm package.
Here is the library for Bosch device BME680 that integrates for the first time individual high linearity and high accuracy
sensors for gas, pressure, humidity and temperature. It consists of an 8-pin metal-lid 3.0 x 3.0 x 0.95 mm LGA package which is designed for optimized consumption depending on the specific operating mode, long term stability and high EMC robustness.
I've designed the library for family of Atmel devices AT30TSE750, AAT30TSE752A, AT30TSE754A, AT30TSE758A which are 9- to 12-bit Selectable, ±0.5°C Accurate Digital Temperature Sensors with Nonvolatile Registers and Serial EEPROM and all are available in SOIC8, MSOP8 and UDFN8-2x3mm packages.
To get more libraries for new devices feel free to visit My Facebook Group
Here is the library for another new Fairchild device FL7734 which is a highly integrated PWM controller with advanced Primary-Side-Regulation (PSR) technique to minimize components for low power LED lighting solutions. Using the innovative TRUECURRENT technology for tight constant-current control, it enables designs with constant-current (CC) tolerance of less than ±1% in the wide line voltage range to meet stringent LED brightness requirements. It is available in SOP16 and I also designed dedicated footprint.
You can find much more libraries for many new devices at
My Facebook Group
Here is the library for another Texas Instruments device ADS1293 which is Complete Low Power Integrated Analog Front End for ECG Applications and it comes with QFN28 package'
For much more libraries of new devices (at least 10) I've recently designed visit my facebook page
Here is the library for Texas Instruments device CC2541 which is a power-optimized true system-on-chip (SoC) solution for both Bluetooth low energy and proprietary 2.4-GHz applications. It enables robust network nodes to be built with low total bill-of-material costs. The CC2541 combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, Its provided in a 40 pins QFN package and I also I've created its footprint.
I've designed the library for new NXP device TFA9897 which is a high efficiency class-D audio amplifier with a sophisticated speaker-boost protection algorithm. The TFA9897 is available in a 30-bump WLCSP (Wafer Level Chip-Size Package) with a 400 um pitch.
Here is the library for Bosch device BMP280 which is an absolute barometric pressure sensor especially designed for mobile
applications. The sensor module is housed in an extremely compact 8-pin metal-lid LGA package with a footprint of only 2.0 × 2.5 mm2 and 0.95 mm package height. Its small dimensions and its low power consumption of 2.7 μA @1Hz allow the implementation in battery
driven devices such as mobile phones, GPS modules or watches.
You can find much more libraries for new device at my facebook page
TE Connectivity PolyZen devices (protected Zener diodes). Contains the most recent devices in CE and LS packages. This new revision includes minor corrections on the footprints and the schematic symbol.
DIY Modules for Arduino, Raspberry Pi, CubieBoard etc.
The library contains a list of symbols and footprints for popular, cheap and easy-to-use electronic modules. The modules are intend to work with microprocessor-based platforms such as Arduino, Raspberry Pi, CubieBoard, BeagleBone and many others. There are many manufacturers of the modules in the world. Almost all of them can be bought on ebay.com.
By using this library, you can design a PCB for devices created with usage of modules. Even if you do not need to create PCB design, you can also use the library to quickly document your work by drawing schematics of devices built by you.
The latest version, examples, photos and much more can be found at: www.diymodules.org/eagle
Comments, suggestions and bug reports please send to: email@example.com
Version: 1.0.0 (2015-Feb-02)
This Package only contains the DRV8811 Stepper Motor Controller IC (HTSSOP28) from Texas Instruments. I am not affiliated with Texas Instruments in any way, I just couldn't find this library anywhere else, so I made my own.
Here is the library for st-microelectronics device VL6180X which is proximity and ambient light sensing (ALS) module. The L6180X is the latest product based on ST’s patented FlightSense™ technology. This is a ground-breaking technology allowing absolute distance to be measured independent of target reflectance. I've created dedicated footprint for this device.
For more libraries visit My facebook group
Here is the library for st-microelectronics device ASM330LXH which is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope. The ASM330LXH is available in a plastic land grid
array (LGA) package
The 60 MHz LPC2194 from NXP is based on a 16/32-bit ARM7TDMI-S CPU with 256 kB of embedded high-speed flash memory. This library could also be helpful for related parts including LPC2129, LPC2119, and LPC2109, as the pinouts are similar, perhaps almost identical.
AMS magnetic Hall-effect 14-bit angle sensor. Same as AS5047D but automotive temp? Has SPI, quadrature, commutation, and PWM outputs (some at only 11 bits). Built-in delay-reducing code for high speed.
This library enables the Coridium ARMmite microcontroller card to be mounted as a daughter card on a larger PCB. All 24 I/O lines and the uC 3.3 V power are made available. The uC may be powered from 5V on the PCB by making a link on the ARMmite board to the power connector. Using 0.1" pitch header pins and sockets the ARMmite can be made plug in. The ARMmite is a very competent ARM7 32 bit uC, programmable in Visual Basic or C, and supporting Floating Point arithmetic. See http://www.coridiumcorp.com/ for details.
Here is the library for Maxim Integrated device MAX9814 which is is a low-cost, high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preamplifier, variable gain amplifier (VGA), output amplifier, microphone-bias-voltage generator and AGC control circuitry. The MAX9814 is available in the space-saving, 14-pin TDFN package.
Here is the library for Melexis device TH72001 which is FSK transmitter IC designed for applications in the 315 MHz industrial-scientific-medical
(ISM) band. It can also be used for any other system with carrier frequencies at 290 to 350MHz. It comes in package SOIC8.
At my facebook page you can find much more new libraries I've recently designed .
Feel free to visit my fp at My facebook page
Here is library for the Ixys device NCD2100 which is Non-volatile
Digital Programmable Capacitor with capacitance range of 6.6pF to 37.553pF in single step of 0.063pF. It is provided in 2 packages DFN6-2x2mm and TSOT6-2.9x2.8mm.
mit bewährten Federanschlusstechnologien bieten eine Vielzahl unterschiedlicher Varianten und Baugrößen, für Leiterquerschnitte von 0,08 mm² bis 16 mm². Für die verschiedenen Einsatzgebiete bietet WAGO spezielle Lösungen, wie THT-, THR- und SMD-Varianten mit einer großen Auswahl an unterschiedlichen Handhabungen für alle Leiterarten.
WAGO PCB terminal blocks
with proven spring connection technologies offer a variety of different types and sizes for conductor cross-sections from 0.08 mm² to 16 mm². For the various fields of application, WAGO offers specific solutions such as THT, THR and SMD versions with a wide range of uses for all conductor types.
#new version 2.1.0 #new articles #bugfixes #eagle 6+
CTS TF32 series crystals. These are 32.768 crystals for RTC applications and are supplied in a small and convenient SMD package, measuring only 3.2mm by 1.5mm wide. Contains all available technologies.
Library for Mikroe Mikromedia for Pic18FJ board with SMD pads. Demo sch/brd included.
Mikromedia is a embedded development platform for mobile devices. It comes with TFT, Touch, SD, USB, MP3 chip Eprom, Accelerometer LiOn Loader on etc. Many cores such as ATMEGA XMEGA PIC24 PIC32 are available too.
I use it for some data logging systems in industrial environment.
WAGO Multi-Connection-System – Steckverbindersysteme in verschiedenen Baugrößen für Leiterquerschnitte von 0,08 mm² bis 10 mm² ermöglichen den Einsatz in „ Wire-to-Wire“, „Wire-to-Board“, „Board-to-Wire“ und „Board-to-Board“ Anwendungen. Eine große Auswahl an unterschiedlichen baulichen Varianten sowie verschiedenen Federanschlusstechnologien für alle Leiterarten erhöhen die Flexibilität.
WAGO MCS (MULTI CONNECTION SYSTEM) – Connector systems in various sizes for conductor cross-sections from 0.08 mm² to 10 mm² make use in "wire-to-wire", "wire-to-board", "board-to-wire" and "board-to-board" applications possible. A wide range of different structural versions, as well as various spring connection technologies for all conductor types increase flexibility.
#new version 2.1.0 #new articles #bugfixes #eagle 6+
Here is the library for Vishay devices SiC620 and SiC620A which are are integrated power stage solutions optimized for synchronous buck applications to offer high current, high efficiency, and high power density performance. Packaged in Vishay’s proprietary 5 mm x 5 mm MLP package which has complicated footprint and I've spent the most time for creating it.
As you surely know LED lights are very popular now so this morning I've designed the library for Texas Instruments device TPS92661-Q1 which is High-Brightness LED Matrix Manager for Automotive Headlight Systems. It comes with package S-PQTP-G48 with exposed thermal pad
Smart metering becomes very popular these days and many companies produce specialized ICs for that and today I've designed the library for Maxim Integrated devices MAX71314/MAX71315 which are single-Phase Electricity Meter SOCs. It comes with 100 pins package LQFP 14x14mm.
PIC18F4550 microcontroler from Microchip, ML version only. Although this component already exists inside microchip.lbr, this improved version has a corrected footprint. It is important to mention that the solder paste layer (tcream) only takes about 60% of the area concerning the exposed pad. This is important so the chip wont float on top of the solder pool covering that pad during the reflow process, being properly seated and with all connections guaranteed. Also, divisions in the stencil covering the exposed pad area guarantee that the solder paste is evenly distributed throughout the area to be covered.
Here is the library for Blue Creation device BC118 which is the newest generation of fully integrated Smart Bluetooth (Bluetooth Low Energy 4.0) modules. BC118 offers ultra low power consumption, extensive features at a competitive price.
Here is the library for Bluetooth Low Energy (BLE), also called Bluetooth Smart module PAN1740. For this device I have built completely from scratch its very complicated footprint based on data sheet info. Feel free to loot at this nice pattern of pads.
Here is the library for Linear Technology devices LT3669 and LT3669-2 which are IO-Link Transceiver with Integrated Step-Down Regulator and LDO. For this device I've designed the footprint for the package QFN28-4x5mm.
Here is the library for Intersil new device ZL8801 which is a dual phase digital DC/DC controller. Up to four ZL8801s (8 phases) can be operated in parallel to provide additional output current. For this device I've designed dedicated footprint.
Here is the library for Diode device AP1695 which is offline, high pf, high efficiency dimmable LED driver. It comes with package SO-7 that footprint I've create from scratch.
More libraries you can find at my Facebook group page https://www.facebook.com/groups/eaglecadsoftUK
Here is the library for Texas Instruments devices TPS63025x which are high current, high efficiency single inductor buck-boost converter. It comes with package R-XBGA-N20 that I've created from scratch.
The TPS61500 is a monolithic switching regulator with integrated 3-A, 40-V power switch. It is an ideal driver for high brightness 1-W or 3-W LED. The device has a wide input voltage range to support application with input voltage from multi-cell batteries or regulated 5-V, 12-V power rails.
Today I've designed the library for latest Texas Instruments device RF430F5978 which is System-in-Package With Sub 1-GHz Transceiver and 3D LF Wake Up and Transponder Interface. It comes with 64 pins package.
Here is the library for the SPWF01SA and the SPWF01SC which are intelligent Wi-Fi modules represent a plug and play
and standalone 802.11 b/g/n solution for easy integration of wireless Internet connectivity features into existing or new products. They can be used in "Internet of Things" applications. I've created special dedicated the pads pattern (footprint) for this device.
Much more the libraries I've designed recently at https://www.facebook.com/groups/eaglecadsoftUK
Here is the library for STLUX385A which is digital controller for lighting and power conversion applications with 6 programmable PWM generators, 96 MHz PLL, with special interface DALI popular for LED applications.
Here is the library for high power and high density DC/DC complete power module with max 80V and 4A at small size 15x15mm, with all protections, ideal for applications with high efficiency power supplies. I've created very complicated its footprint from scratch.
The library for ISL8240M which is a fully-encapsulated step-down switching power supply that can deliver up to 100W output power from a small 17mmx17mm PCB footprint. The two 20A outputs may be used independently or combined to deliver a single output of 40A. I've spent the most time for creating so complicated its footprint. Take look to see it then!
Here is the library for MAAL-011111 which is a three stage 22 - 38 GHz GaAs MMIC low noise amplifier. This device has a small signal gain of 19 dB with a noise figure of 2.5 dB. The device comes with package QFN16 3x3mm.
Here is the library for micrel DSC400 which is a four output crystal-less™ clock generator. It utilizes Micrel’s proven PureSilicon™ MEMS technology to provide excellent jitter and stability while incorporating additional device functionality. The frequencies of the outputs can be identical or independently derived from common PLLs. The device comes with package QFN20 5x3.2mm which footprint I've designed from scratch.
Here is the library for Microchip digital pot which can work at higher voltage up to 36V in analogue circuitry, with programmable resistance 5k, 10k, 50k and 100k.
I've designed the footprint for package QFN20-MQ from scratch.
The library for PCA9955A which is an I2C-bus controlled 16-channel constant current LED driver optimized for dimming and blinking 57 mA Red/Green/Blue/Amber(RGBA) LEDs in amusement products.
The device has HTSSOP28 package and I've designed the library for it from scratch and you won't find it anywhere else.
Here is the library for high speed, high voltage up to 40V, 1 A output drive amplifier. Ideal for driving high capacitive or low resistive loads. Applications: Envelope tracking, power FET driver, ultrasound, piezo drivers, PIN diode drivers, waveform generation, automated test equipment (ATE), CCD panel drivers, composite amplifiers.
Library for the XR71211which is a ultra low drop-out voltage regulator capable of delivering an output of 1.5Amps. It differentiates from its competitors by being able to operate from a single supply rail of 1.4V to 2.625V without the need for a noise generating charge pump or secondary bias rail
Prolific PL-2303 USB to Serial Converter.
This library includes the latest PL-2303HX Rev D released in 2013. The new version doesn't requires external oscillator and offers 4 GPIOs.
The PL-2303XA in this library was released by Sparkfun, while the version HXD is new.
The MAX6126 is an ultra-low-noise, high-precision, low-dropout voltage reference. This family of voltage references feature curvature-correction circuitry and high-stability, laser-trimmed, thin-film resistors that result in 3ppm/°C (max) temperature coefficients and an excellent ±0.02% (max) initial accuracy.
SO8 and µMAX8/uSOP8 package
Trenz Electronic TE0720s are industrial-grade SoMs (system on modules) integrating a leading-edge Xilinx Zynq-7000 SoC, gigabit Ethernet transceiver, 32-bit-wide 1 gigabyte DDR3 SDRAM, 32 megabyte SPI Flash memory for configuration and operation, eMMC, and powerful switch-mode power supplies for all on-board voltages.
Magnetic Reed Library
Reed switch based proximity sensor activated by the presence of a magnetic field.
(C) 2014 Tomasz Boleslaw CEDRO, firstname.lastname@example.org, http://www.tomek.cedro.info.
Version 1.0 (2014-01-26): Initial release.
Small Footprint RMII 10/100 Ethernet PHY Transceiver with HP Auto-MDIX Support
from SMSC / Microchip.
(C) 2014 Tomasz Boleslaw CEDRO, email@example.com, http://www.tomek.cedro.info.
Version 0.1 (2014-01-04): Initial release.
Another batch of old chips:
74C923 20-key encoder
DS1010 10 taps delay line
LM336 Voltage reference
LM725 Instrumentation op-amp
LM1881 Video sync separator
TL431 Programmable precision reference
This file is now in EAGLE V6 format.
The original description is as follows:
Parts for Xilinx FPGA families of Spartan 3, 6, Artix 7, Kintex 7 and Virtex 2, 4, 5, 6, 7 and Zynq-7000 EPP. Automatically generated from Xilinx ASCII pinout files. Absolutely no warranty !
Freescale Kinetis k20 80 pin, LQFP 80 12*12*1.4P0.5 (k20_80). Full copy of http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MK20DN512VLK10&buyNow=true&fromSearch=true
part number MK20DN512VLK10. Should match all others k20 80 pin variants
BC05B Bluetooth stereo receiver module base on CSR BlueCore5 MM design. With high integration, small size and other features, just with a few external components to achieve its powerful features.
Establish a connecte with the A2DP, AVRCP transmission and remote control protocol any Bluetooth source device (such as: Bluetooth-enabled mobile phones, Bluetooth stereo audio transmitter modules, Bluetooth adapter, etc.) to the wireless receiver to achieve high-quality stereo audio stream and audio player with remote control.
BC05B stereo Audio Bluetooth Speaker module to provide users with a remote control button interface, work status indication interface, stereo audio output jack, microphone input interface.
Class2 power level.
Built-in lithium battery charging circuit.
Powerful noise elimination circuit.
The effective transmission distance of up to 20 meters.
Very small surface mount packages: 15x21mm
Bluetooth V2.1 + EDR Bluetooth specification
With SBC, MP3, AAC audio decoder function.
With the A2DP and AVRCP are high quality stereo audio transmission protocol with the remote control
Embedded powerful Kalimba DSP data processor to complete a variety of digital speech processing.
Max current: 50mA
Paired name: BT-Speaker ; Pair password : 0000
Olimex AVR-CAN Module, Rev. A (60 x 50)mm; http://www.olimex.com. Device-Sets to mount module as a piggy-back onto the user's board.
2 Symbols available: pins arranged by function or arranged by pin-number of Olimex' connectors EXT1 and EXT2. Eagle 5+.
Collection of Pololu Modules to be placed onto user's target board. Rev. 5.3.0 (Eagle 5+).www.pololu.com.
• Adjustable Step Down Voltage Regulators Series D24V3A_V
• Voltage Regulator Modules D24V3A_V, D24V6A_V
• Motor Driver Carrier Board VNH2SP30 and VNH3SP30 MD01B
RECOM Powerline RAC0x-xxSC AC-DC PCB-mounted switching converter modules. Self-contained 120v/240v AC to 3.3v/5v/9v/12v/24v DC, with multiple current ratings.
This library supports all variants.
Source datasheet: http://www.recom-power.com/pdf/Powerline-AC-DC/RAC01_02-SC.pdf
picoMAX – Das Steckverbindersystem
Kompakt, rüttelsicher, intuitiv, universell und wirtschaftlich!
picoMAX – The Pluggable Connection System
Compact, vibration-proof, intuitive, universal and efficient!
Impellimax NEW product line features a wide range of “Building Block” devices all housed in the 14 lead K package, also standard products include: PIN Diode Drivers; Transfer Function Linearizers; Obsolete, DMS, and Obsolescent Components; GaAs MMIC Drivers. We provide MIL-spec and commercial products. Please contact factory for your specific package and pinout needs. www.impellimax.com 603-886-9569. (impellimax-drivers-c.lbr Rev C)
Trenz Electronic TE0720s are industrial-grade SoC modules integrating a Xilinx Zynq Z020 SoC, a gigabit Ethernet transceiver (physical layer), 8 Gbit (1 Gbyte) DDR3 SDRAM with 32-bit width, 32 Mbyte Flash memory for conﬁguration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of conﬁgurable I/Os is provided via rugged high-speed stacking strips.
IGBT transistor in some packages:
TO-220 (copy from "ref-packages.lbr");
TO-251 / IPAK (copy from "transistor-fet.lbr");
TO-252 / DPAK (using datasheets from STMicroelectronics);
TO-262 / I2PAK (copy from "transistor-power.lbr");
TO-263 / D2PAK (using datasheets from STMicroelectronics).
WAGO MCS - MULTI CONNECTION SYSTEM Version 1.0.1
The Complete Range
Der "kleinste" MCS-Steckverbinder mit CAGE CLAMP Anschluss
The "most compact" MCS connector with CAGE CLAMP termination
Das "kompakte" MCS-Programm mit CAGE CLAMP oder CAGE CLAMP S Anschluss
The "compact" MCS MINI connector range with CAGE CLAMP or CAGE CLAMP S termination
MCS MINI HD
Das "2-reihige" MCS-MINI-System mit CAGE CLAMP Anschluss
The "2-row" MCS MINI system with CAGE CLAMP termination
MCS MIDI 100%
Das "vielseitige" MCS-Programm mit CAGE CLAMP oder CAGE CLAMP S Anschluss
The "versatile" MCS connector range with CAGE CLAMP or CAGE CLAMP S termination
MCS MIDI CLassic
Die "klassische" MCS-MIDI-Variante mit CAGE CLAMP oder CAGE CLAMP S Anschluss
The "classic" MCS MIDI version with CAGE CLAMP or CAGE CLAMP S termination
Das "hochstromige" MCS-Programm mit CAGE CLAMP S Anschluss
The "high current" MCS connector range with CAGE CLAMP S termination
Mehr Informationen unter www.wago.com
Power Integrations, Inc., founded in 1988, is the leading supplier of high-voltage analog integrated circuits (ICs) used in power conversion. Power Integrations ICs enable compact, lightweight power supplies that are simpler to design and manufacture, more reliable, and more energy-efficient than those made with competing technologies.
Updated NXP semiconductors library for Eagle 6 and higher. Contains Microcontrollers, Triacs, Diodes, Transistors and miscellaneous devices. LPC1100 and LPC1300 series updated and devices updated. LPC4000 and LPC4300 series devices added.
The MPU-9150 is the world’s first integrated 9-axis MotionTracking device that combines a 3-axis MEMS
gyroscope, a 3-axis MEMS accelerometer, a 3-axis MEMS magnetometer and a Digital Motion Processor™ (DMP™) hardware accelerator engine.
CC2540F128 / CC2540F256
(rev. 5.0.0 for EAGLE 5 or higher)
Texas Instruments 2.4-GHz Bluetooth® low Energy System-on-Chip
Package: QFN40-6x6mm (TI-postfix "RHA")
Prototype version - check carefully before use
This Library includes a number of Packages used by the NXP CORTEX-M Controllers
This includes the following packages:
LBGA256, LQFP208, TFBGA208, TFBGA180, LQFP144, LQFP100, TFBGA100, LQFP80, LQFP64, TFBGA48, LQFP48, HVQFN33, HVQFN33_5X5, TSSOP28, WLCSP25, HVQFN24, WLCSP16, DIP28, TSSOP20, SO20
Additional components from TI's Qi compliant wireless power reference design kits: transmitter-manager bq500210EVM-689 and receiver kit bq51013AEVM-765 - Learn more at www.element14.com/wireless-power-solution - Included in the .lbr file: parts CSD17308Q3 TPS28225D INA214DCK MSP430G2001 TPS54231D CSD75205W1015
Key components from TI's Qi compliant wireless power reference design kits: transmitter-manager bq500210EVM-689 and receiver kit bq51013AEVM-765
Learn more at www.element14.com/wireless-power-solution
Included in the .lbr file:
BQ500211 Package: RGZ (S-PVQFN-N48)
BQ500210 Package: RGZ (S-PVQFN-N48)
BQ51013A Package: RHL (R-PVQFN-N20)
Infineon low cost constant current source BCR405U (typ. 50mA). For a higher current (up to 65mA) you need 1 external resistor. No more components required. To use PWM you need an external transistor BCR148W (package incl.) or equivalent.
C-Media is a Taiwanese IC maker specialized in audio controllers.
Most of the popular USB sound cards are based on the C-Media CM108 or clones.
This library include popular ICs from C-Media including CM108, CM6300, CM6317A with LQFP-48 packaging.
TSOP IR Receiver and Demodulator modules series TSOP17XX TSOP18XX TSOP48XX TSOP62XX TSOP5XX Based on library by Michel Verhulst (bliksem999 at hotmail dot com)
Corrected Pads at TSOP50xx
This file contains:
From Texas Instruments
DVR8833 in PWP16 package - Low voltaje-high current.
REG103A in KTT package - adjustable LDO regulator from 1.295v to 5.5 v
MMBT918 in SOT-23- NPN RF transistor
QRE 1114 in smd an truhole
Fixed footprint for 64 pin LQFP package in atmel-avr32-michel.lbr
The footprint was the one for the AVR8 devices which is not the same as the one for the AVR32 devices.
The size in the old package was 14x14 where it is supposed to be 10x10
I created the file before this new group for sharing was created
This file contains the DFN10-3X3mm package for the MMA7660FC 3-axis accelerometer. It contains Freescale's recommended soldermask and solderpaste layers and Pin1 designators. Schematic symbol is NOT included. Uploaded by Robert Leavitt from Big Carrot Digital
Wurth Electronics Midcom's Speedy and standard magnetics V1.0. Library contains pad layouts, schematics, pinouts, datasheet links, and basic part information. Created with EAGLE version 4.16r2. Uploaded by Leif Erickson from Wurth Electronics Midcom Inc.
Parts for Xilinx FPGA families of Spartan 3, 6, Artix 7, Kintex 7 and Virtex 2, 4, 5, 6, 7. Automatically generated from Xilinx ASCII pinout files. Absolutely no warranty ! Uploaded by Bogdan Negoescu from Romania
aimtec AM3N Series
3 W DC/DC-Converters; 5/12/24 V Â±10% Input Range; Single and Dual Outputs; DIL24-compatible (metal)
1000/3000/5200 V input/output isolation Uploaded by Rainer Bayer from HHN Hochschule Heilbronn (Heilbronn University)
TRACO TSR-1 Series: Point-of-Load DC/DC-Converters
Vi max. 36 V; Vo = (1.2 .. 15)V +-2%; Io = 0..1 A
SIP-Package: drop-in replacement for 78xx linear voltage regulators in TO220-package, vertically assembled
Source: www.tracopower.com Uploaded by Rainer Bayer from HHN Hochschule Heilbronn ASE/EL/RA
Microchip PIC18F6722 und PIC18F8722 Microcontroller Library (Version 6). http://members.aon.at/electronics/pic/projects/index.html
WICHTIGER HINWEIS: In der Version microchip-pic18f.lbr vom 05.03.2011 ist das Geh
revised version 2: TQFP pad spacing is 0.80mm now to meet atmel specs.
Atmel AVR AT90CAN128, AT90CAN64, AT90CAN32 in TQFP-64
modified symbol (pins on left and right side only, alt. port names, arranged for easy drawing).
Atmel par numbers: AT90CAN32-16AI, AT90CAN32-16AU, AT90CAN64-16AI, AT90CAN64-16AU, AT90CAN128-16AI, AT90CAN128-16AU.
Note: requires EAGLE 5 Uploaded by Rainer Bayer from HHN Hochschule Heilbronn ASE/EL/RA
SANYO FM/AM tuner.
FM: IF amplifier, quadrature detector, AF preamplifier,
signal meter, tuning indicator drive output.
AM:RF amplifier, MIX, OSC (with ALC), IF amplifier,
detector, AGC, signal meter, tuning indicator drive
Package DIP22S Uploaded by radio guru
Atmel AVR AT90CAN128, AT90CAN64, AT90CAN32 in TQFP-64
modified symbol (pins on left and right side only, alt. port names, arranged for easy drawing).
Atmel par numbers: AT90CAN32-16AI, AT90CAN32-16AU, AT90CAN64-16AI, AT90CAN64-16AU, AT90CAN128-16AI, AT90CAN128-16AU.
Note: requires EAGLE 5 Uploaded by Rainer Bayer from HHN Hochschule Heilbronn ASE/RA/EL
4,5 ns Rail-to-Rail High Speed Comparator with Push-Pull Output from TI (formerly: Burr Brwon).
Package: SOT23-6. Original Cadsoft package has been modified to comply with manufacturer's land pattern designations. Uploaded by Rainer Bayer from HHN Hochschule Heilbronn ASE/RA/EL
AM Receiver Circuit
AM receiver circuit fot LW, MW, and SW radio receivers.
Features: Separately controlled prestage, Multiplicative push-pull mixer with separate oscilator,
High large signal capability, Direct connection for tuning meter,
Few external components Uploaded by Radio Guru from Hause
The LA1135 is a high-performance AM electronic tuner IC that
is greatly improved in cross modulation characteristics. It is
especially suited for use in car radio and home stereo (antenna:
. OSC (with ALC)
. IF amplifier
. AGC (normal)
. RF wide-band AGC
. Auto search stop signal (signal meter output)
. Local oscillation buffer output
Uploaded by Radio Guru from home
Modified resistor.lbr - unpol. caps: added 3-pin-symbols for 3-pad-packages (5 packages).
Orig. lbr contains packages in THT which have 3 pads, supporting opt. assembly of 2 different lead-wire spacings, but symbols C-EU and C-US have only 2 pins.
Added devices C-EU-3 and C-US-3 with 3 pins, pins and corresp. pads renamed to 1, 21 and 22.
Connecting adjacent pins 21 and 22 in schematic allows easiliy assembling of 2
different lead-wire spacings on the board. Uploaded by Rainer Bayer from HHN Hochschule Heilbronn ASE/EL/RA
Die Netzer-Bibliothek dient zur schnellen Verwendung des Netzer Ethernetmoduls der Fa. MoBaCon. Das Modul ist eine Gateway-Lösung um TCP/IP basierte Anwendungen Zugriff auf die gängigen seriellen Schnittstellen wie SPI, I2C oder UART zu geben. Auch der einfache Zugriff auf GPIO-Signale ist möglich. Mehr gibts es hier auf den Projektseiten: www.mobacon.de/Netzer Uploaded by Sven Schlender from MoBaCon
SMAJ Series of Transient Voltage Suppressor Diodes
SMAJxxA: unidirectional; SMAJxxCA: bidirectional
Case: SMA (JEDEC DO-214AC)
xx = Stand-off Voltage VR in Volts, available from (5.0 .. 188)V (depending on manufacturer) Uploaded by Rainer Bayer from Hochschule Heilbronn HHN (ASE/EL/RA)
SIM900 GSM module (manufacturer: SIMCom) - SMD, module size: 24x24 mm. Please
check it before use! It's beta-version only. Uploaded by Bartosz Kołodziej from Instytut Niskich Temperatur i Badań Strukturalnych PAN, Wrocław
Capacitors SMD Outline 2824 / 2824-N (acc. to WIMA solder pad recommendations, e.g. WIMA Metallized polyester SMD capacitors
with plastic box encapsulation) Uploaded by Rainer Bayer from Hochschule Heilbronn HHN
LinkSwitch-TN family from Power Integrations. LinkSwitch Family products incorporate a high-voltage power MOSFET, oscillator, simple ON/OFF control scheme, a high-voltage switched current source. Only the SMD-8B package is included. Pins 1 2 7 and 8 must be connected together and to a ground plane for heatsinking and EMI, as described in Fig. 6a from datasheet. Uploaded by Arturo Gil from Universidad Miguel Hern
Library part for a Densitron OLED display, part DD-9664FS-2A. This part is stocked by RS, Farnell and DigiKey, but there is no connector available for the ribbon as it is intended to be hot bar soldered only.
This footprint has both 'flat' and 'folded' versions, where the folded has the ribbon folder underneath the part. Uploaded by Mike Evans from Halo Electronic Services
ST STM32101/103 ARM Cortex-M3 Microprocessors in TQFP100,64,48, BGA100, 64 and VFQPFN36 pin packages. Have not actually used the BGA packages yet, so check carefully. Uploaded by Phill Brown from Phisics Dept, University of Otago
parts used to construct a timer device
1N4007,ADM692,ADM695,ericsson_T2X_LCD,conrad_641138,LTC1944,LTC1682-5,LTC3429,LTC4059,M41T81S,MEGA8-P,MEGA8,SCHOTTKY_SMA Uploaded by Ferenc Demjanics from FEKT VUT Brno
Analog Devices ADG451 ADG452 ADG453 LC2MOS Quad SPST Analog Switches, in standard SOIC16 package only (BR- / BRZ- ordering code).
Devices (symbols) available in "exploded view" and "case style view". Uploaded by Rainer Bayer from Hochschule Heilbronn HHN
The JN5139-xxx-Myy family is a range of surface mount zigbee modules. Three basic hardware module variants are available: JN5139-xxx-M00 with an integrated antenna,
JN5139-xxx-M01/M03 with an antenna connector and JN5139-xxx-M02/M04 with a power amplifier and LNA for
According to Jennic datasheet: http://www.jennic.com/download_file.php?supportFile=JN-DS-JN5139-001-1v8.pdf Uploaded by Vadim Tcherenyov
Vincotech_GPS_MODULE A1084-(A/B) this file contine the schematic and board design to be implemented in an easy and fast way on your own projects. Uploaded by Cristian Eduardo Soto Corvera from SOTO CORP.
PSoC Devices from Cypress Semiconductor.
Created by Aaron Carlton
Free as in Free Beer.
This is by no means complete, But I wanted to share what I had for now. I plan to update this library and add more devices. Uploaded by Aaron Carlton from USA Tennessee
Low Power RF-Transceiver of Chipcon/Texas-Instruments Version 2
Review of Footprints after IPC7351A.
New devices are:
CC1070, CC1190, CC2520, CC2530, CC2531, CC2590 and CC2591. Uploaded by Steffen Hofmann
A comprehensive collection of Molex Milli-Grid 2mm board-to-board connectors. This is the first release, check all parts, connections and pins carefully before using. Uploaded by Bob Starr from RTZ Audio
This library is a collection of various pin headers and AMP, Molex and 3M board-to-board connectors. This library assumes the notion of JACKS(male) and PLUGS(female) as represented by the J and P symbols. Standard male/female pin header types are available in common 0.1" and 2 mm pitch types with alternate mirrored footprints as well. Uploaded by bob starr from RTZ Audio
Parts for Xilinx FPGA families of Spartan 3, 6 and Virtex 2, 4, 5, 6. Automatically generated from Xilinx ASCII pinout files. Based on the previous lib xilinx_spartan3 virtex4 and_5.lbr file. Absolutely no warranty ! Uploaded by Bogdan Negoescu from Romania
Small library of components I used for a project: LTC1440 (ultralow power comparator), LT1529 (5 V LDO regulator with shutdown), DS1302 (Dallas realtime clock). Uploaded by Maurits Hartman from Hobbyist
ADG211A* and ADG212A* Quad SPST Switch (LC2MOS) with inverting and noninvertion logic
These Switches feature hight switching speets and low Ron
Replaces DG211 and DG212 Uploaded by Clemens v. Loewenich from TU Darmstadt
AX5051, AX5042, AX5031, AX50424
Universal, low cost SRD transceiver ICs for the 400-470MHz and 800-940MHz bands provide flexible modulation (ASK, FSK, PSK)
with bit rates from 1kbps up to 600kbps. Supported framing formats: HDLC (with automatic CRC generation/verification), ZigBee, RAW, RAW with preamble match.
Please visit http://www.axsem.com for further information Uploaded by Rashid Talib from AXSEM AG
Updated (and fixed!) 200902 EDE library. Now includes 1200 stepper motor controller, 702 LCD interface, 300 Par/Ser transceiver, 1144 4x4 keyboard encoder, 1188 8x8 keyboard encoder. Uploaded by Dave Merriman from Montana, USA
WIESON 6173-15xxxx series SD and MMC memory card connector (PUSH / PUSH TYPE)
with card detect and write protect switches - SMD mount
Based on datasheets obtained from www.wieson.com Uploaded by Bartosz Kilian from Poland
with worldwide CID & CIDCW
V.22bis Single Chip Modem, 3.3V.
Surface mount TQFP package, 0.8mm pitch.
Backward compatible with 73M2901CL. Uploaded by Ron McFarland from RGM Enterprises, CA USA
dsPIC33FJ256MC710 High end 100-pin dsPIC
This is an updated library by Francesco Orfei ( firstname.lastname@example.org).
This updated library adds:
1) package information;
2) ordering information (complete IC name for ordering);
3) correct VALUE presentation of the device in the schematic;
4) some pins in the schematic symbol has been moved for a better connection;
5) VSS, AVSS and VDDCORE pin direction has been fixed for a correct ERC. Uploaded by Francesco Orfei from Tomorrow's Solutions, Umbertide, Italy
Improved Telit 862 GSM GPS modul library added Chasis connection to symbol variant A.
www.poscope.com affordable USB oscilloscopes, USB to UART converter, USB IO boards Uploaded by Boris Zalokar from PoLabs
Based upon v-reg-2.lbr, including ltc_swr.lbr
Added some different packages for old regulators and many new linear and switching regulators:
LT1767, L4931, L4949E, LM2931, LP298x, IRU1205, TK112, TK113, S-812, LM257x, LM267x, MC34063A and PR440x
Uploaded by Eike Schmidt
updated "digital-transistors.lbr", added missing packages, completed Infineon BCR series including dual transistor devices BCRxS, BCRxU, BCRxPN and current source devices BCR4xx Uploaded by Eike Schmidt
This library now includes ONLY ATMEL AVR microcontrollers. It is the result of merging ALL OTHER AVR LIBRARIES available at http://www.cadsoft.de/download as of 3/08 along with my own. In addition to the legacy AT90* devices, it includes most ATMEGA devices including the new 48/88/168, most ATTiny devices and a set of ISP and JTAG pin headers. Uploaded by David Blundell from DB Designs
This Library was generated to support the circuit board design during my diploma theses at the Vienna University of Technology, INTHFT in the field of UHF RFID in 2007/08.
It contains Amplifiers, Mixers, Filters, Couplers and RF-Transformers, especially from Analog, Maxim, Linear, MA/Com, Coilcraft and Mini-Circuits. Uploaded by Gregor Lasser from TU-Wien
LP2986 Micropower, 200 mA Ultra Low-Dropout Fixed or Adjustable Voltage Regulator
Packge: Mini SO-8 (The same as MUA08A)
The datasheet is available on: http://www.national.com/an/AN/AN-1187.pdf Uploaded by Razi Raslan from Tampere University of Technology
Updated optocoupler library. Aded TLP181 - SMD with 2,54 raster.
www.poscope.com the most affordable USB osciloscope and development tools Uploaded by Boris Zalokar from www.poscope.com
This library file contains one part: the PTN78060WAH 3A wide-input adjustable switching regulator from Texas Instruments. The padding, hole spacing, and layout has has all been verified in a PCB made that used this library part. Uploaded by Bill Blohm from HP Boise, Idaho, USA
fido1100 32-bit MCU from Innovasic. Flexible-Input/Deterministic-Output ('fido'). 32-Bit Real-Time Microcontroller with Configurable Peripherals.
Uploaded by Douglas Beattie from Consultant, Utah, U.S.A.
SMD library for the new component of Maxim MAX882 (adjustable linear voltage regultor).
Note: I found this library on your download section but it does not contains the SMD part. Thereofore, I have designed this library to be complementorty to the DIP one. Uploaded by Razi Raslan from Tampere University of Technology and CorusFit Oy
Library for Vishay TSOP312xx and TSOP348xx IR Receiver Modules for Remote Control Systems. Based on library by Eric Schinkoeth Reis Barbosa da Cruz. Added TSOP348xx. Uploaded by Arno Verhoeven from ILLUMICON
Epson S1D15G00 or Philips PCF8833-based Nokia 5100/6100/6610/7210/7250 128x128 12-bit color LCD display with integrated LED backlight Uploaded by Pawel Szramowski from Silesian University of Technology, Poland
MP3H6115A: High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated and Calibrated Uploaded by Pawel Szramowski from Silesian University of Technology, Poland
MMA7260/MMA7261: Freescale ±1.5g-6g/±2.5g-10g three axis low-g micromachined accelerometers. This library can be also used for MMA62xx series of accelerometers - these devices may have Self-Test instead of /Sleep input, fewer G-select inputs or only two voltage outputs, but general layout is the same. QFN-16 footprint has enlarged pads for hand-soldering. Uploaded by Pawel Szramowski from Silesian University of Technology, Poland
ABG128064J (old no. AV-G12864B1): T6963C-based graphic type STN/FSTN 128x64 dot matrix LCD module with LED backlight and on-board negative voltage generator produced by Shenzhen AV-Display Uploaded by Pawel Szramowski from Silesian University of Technology, Poland
Update con-faston.lbr, holesize of the F061.080 is enlarged to 0.047244" (1.2mm), was previous 0.043", which is too small for many fastons, especially with plated holes. Uploaded by Cor van Rij from Tasseron Bv, NL
This is a complete library for the Parallax Propeller MCU. It includes the DIP, LQFP and QFN packages. I've checked the library for accuracy, but please let me know if any errors are found. Uploaded by Mark Speir from Texas, USA
Contains 2 popular graphics controllers from Epson, including S1D13505 (LCD/CRT, external 512K/2M DRAM) and S1D13706 (LCD, on-chip 80K SRAM). Uploaded by Douglas Beattie Jr. from Consultant, Utah, U.S.A.
R/C MASTER! - v1.07 (07/03/2007)
This library is a collection of SMD and through hole resistors and capacitors by various manufacturers. Some of these include types from Panasonic, Kemet, BC Components and others. Many of the packages were adapted from rcl.lbr and cap-pan40.lbr and have been renamed and grouped in a more logical form. Uploaded by Bob Starr from RTZ Audio
R/C MASTER-SMD! - v1.01 (07/03/2007)
This library is a collection of SMD ONLY resistors and capacitors by various manufacturers. The pad sizes, spacing and silkscreen widths have been tweaked for use in dense fine pitch layouts where space, alignment and precision are critical. In general these components are designed for routing in grid increments of 5 mils.
Uploaded by Bob Starr from RTZ Audio
Packages, Symbols and Devices for Xilinx Spartan 3, Virtex 4 and Virtex 5 FPGAs.
All of them. Automatically generated from Xilinx ASCII pinout files. Packages according to Xilinx drawings and recommendations. Not tested, no warranties whatsoever.
Uploaded by Liviu Popa from Liviu Popa Comunicatii SRL
Pickering SIL shielded Relays, use TTL or 74HC drive. 101 and 107 series.
Includes detailed description page.
Updates available from www.pcserviceselectronics.co.uk Uploaded by Paul Carpenter from PC Services - Reading, UK
FTDI USB chips. Update of ftdichip-1.lbr - consistent symbols, part prefix and other tidy ups, includes description page. Also available from www.pcserviceselectronics.co.uk Uploaded by Paul Carpneter from PC Services - Reading, UK
Library for the ATMEL - Microcontroller AT90CAN and AT90USB.
Supplied part types: AT90CAN32, AT90CAN64, AT90CAN128, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287.
The folowing packages are avalible: QFN64, TQFP64.
Uploaded by Jochen Deininger from Conti Temic microelectronic GmbH
Fairchild Semiconductor TinyLogic. Includes all gates, buffers and inverters (but not universal configurables, decoders, multiplexers or flip-flops). Uploaded by Weartronics from http://www.weartronics.com/
IPC-7351 compliant SMT transistors. Devices are Fairchild Semiconductor types. Updated to include MOSFET-NCH and MOSFET-PCH devices in SOT-23, SOT-223 and SO-8 packages. Uploaded by Weartronics from http://www.weartronics.com/
An (almost) complete library of Chipcorder (ISD) voice record/playback devices manufactured by Winbond. It includes the two chips that come with the stock isd.lbr file.
**Added ISD1700 Uploaded by Sigur
Xilinx Spartan3, XC3S1500FG676
Multiple symbols in device to allow it to cross multiple schematic pages. Not verified with a pcb fab run as of 29 Jan. 2007. Uploaded by Terry Fowler from Runbot